当前位置：主页 > 新闻中心 > 新闻中心
滚筒输送线对接简述
时间：2018-09-13来源：潘轩浏览次数：
- OP110工位包括一段15米的机动滚筒输送线用于和主线上的上续滚道的对接。
- In this position operator can also as in-process parts re-introduction.
- 此工位同时也用于中间工序的手动再投料。
- Using PZR conveyor for transmit Cylinder Head, part will be one by one
- 滚道高900mm，辊道速度6-10m/min滚轮间距88.8mm。High 900mm , transmission speed 6~10m/min and each roller distance is 88.8mm.
- 滚道纵梁采用南京佳顿自动化公司专用铝合金型材，罩壳采用扣压方式，便于维护。Using marposs standard aluminium beam with KBG style cover easy to be take off to do maintanence ,].
- 选用SEW减速电机驱动，电机安装在滚道侧面。传动方式链轮链条形式。 Driver using SEW motor , motor assembly on one side of conveyor beam, and using chain transmit parts.
- 采用端面摩擦滚子轴部件，通过滚子一端的螺母来调节端面摩擦力。using friction roller , with screw adjust the friction force.
- 滚轮采用不锈钢材质，表面包胶，滚轮采用双轴承支撑。中轴采用45＃钢调质后加工制作，表面发黑处理。 Roller using stainless steel with rubber coating and double bearing support.
- 滚道采用不锈钢导向板导向，保证美观、耐磨、不腐蚀 using stainless steel material part guide to make sure beauty, wearproof, non-corroding.
- 滚道下部设置扣接型积油盘，其中最末端一段为漏斗型积油盘，下部设置放水阀，方便冲洗清理；积油盘采用1mm钢板制作。 Set one drip corrector under conveyor to correct Cutting fluid, with one manual valve to vent out all fluid.
- 滚道支架采用槽钢GB/T707-10 焊接而成，下设调整地脚，可调整滚道水平和高度。Using U-steel to weld the frame, with foot to adjust the high .
- 滚道上配置专用气动挡料器。With pneumatic stopper
- 上料滚道处安装工件姿态防错机构。With mechanical unit to err-proof wrong status part enter into station.
上一篇：汽车缸体生产线技术协议
下一篇：重力式进给溜冰轮输送线
